Refrigeration: Maintaining your refrigerator is an important part of keeping your home running smoothly. A poorly maintained refrigerator can cause many problems, including increased energy usage and spoiled food. Here are some tips for how to keep your refrigerator running smoothly.


Check the door seals regularly.

Refrigeration: The door seals on your refrigerator keep the cold air in and the warm air out. Over time, these seals can become worn or damaged, which can cause your refrigerator to work harder to maintain the correct temperature. To check the door seals, close the door on a piece of paper and try to pull it out. If there is any resistance, the seal is still good. If the paper slides out easily, you will need to replace the door seal.

To replace the door seal, you will need to remove the old seal and install the new one. Start by removing the screws that hold the seal in place. Once the screws are removed, you can carefully peel the old seal away from the door. Be careful not to damage the door surface. Once the old seal is removed, clean the door surface with a mild soap and water solution. Allow the surface to dry completely before installing the new seal.

To install the new seal, start at one end of the door and work your way around. Make sure that the seal is tight against the door so that no air can escape. Once you have installed the new seal, replace all of the screws and close the door.


Refrigeration

Clean the coils monthly.

Refrigeration: The coils on your refrigerator help to cool the air inside. When these coils are covered in dust or dirt, they have to work harder to do their job, which can lead to increased energy usage. To clean the coils, simply unplug your refrigerator and vacuum them with the brush attachment. This simple task will help your refrigerator run more efficiently and use less energy.

If you have a manual defrost freezer, it’s important to defrost it regularly. A build-up of ice can insulate the coils and make the freezer work harder to maintain a cold temperature. Most freezers should be defrosted every three to six months. To do this, simply unplug the freezer and remove all of the food. Once the ice has melted, dry the interior thoroughly and put the food back in.

If your fridge is equipped with an automatic to defrost cycle, it’s still a good idea to manually defrost it every few months. This will help keep the coils clean and clear, allowing them to work more efficiently.

When cleaning your refrigerator, be sure to also clean the door gaskets. These are the rubber or plastic strips that seal the door shut. If these become dirty or damaged, they can let the cold air escape, making your fridge work harder to keep things cool. To clean the gaskets, simply wipe them down with a damp cloth and then dry them thoroughly.


Keep the interior clean.

Just like the coils, a dirty interior can make your refrigerator work harder than it needs to. Wipe down the inside of your fridge regularly with a mild soap and water solution. Be sure to clean under any removable shelves or drawers as well. If you have a spill, clean it up immediately, as even small amounts of food can attract mold and bacteria.

In addition to regularly cleaning the interior of your fridge, you should also clean the door gasket. The gasket is the rubber seal that runs around the edge of the door. Over time, this seal can become cracked or brittle, which can cause your fridge to leak cold air. Inspect the gasket regularly for any signs of damage, and replace it if necessary.

Finally, make sure that your fridge is properly ventilated. Most fridges have vents on the back or bottom that allow air to circulate. If these vents are blocked, it can cause your fridge to work harder than it needs to. Vacuum or dust these vents regularly to keep them clear.


Refrigeration

Refrigeration: Don’t overfill it.

An overly full refrigerator can make it difficult for the cold air to circulate properly, which can lead to increased energy usage. When possible, leave a few inches of space at the top of your fridge so that the air can circulate properly.

Another way to cut down on energy usage is to clean your fridge regularly. A dirty fridge has to work harder to stay cool, which uses more energy. Wipe down the shelves and interior walls of your fridge monthly, and be sure to clean up any spills as soon as they happen.

Finally, try to keep your fridge stocked with food. An empty fridge is less efficient than a full one because there is less mass for the cold air to circulate. If you find that you’re not doing a good job of keeping your fridge stocked, consider investing in some freezer bags or containers so that you can store food ahead of time.


Refrigeration: Keep the freezer at least half full.

Similar to an overfilled fridge, an under-filled freezer can also make your refrigerator work harder than necessary. A full freezer helps to keep the cold air circulating correctly, so aim to keep it at least half full at all times. If you’re going to be gone for an extended period,  consider filling your freezer with water-filled plastic containers to help keep everything cold.

In addition to keeping your freezer full, you should also make sure that the food itself is properly sealed. If air can get into your food, it will cause it to spoil more quickly. Make sure that all of your food is tightly wrapped or in resealable bags before putting it in the freezer. Lastly, don’t forget to label everything! Date and label your food so you know when it needs to be used.


Refrigeration

Refrigeration: Avoid opening the door unnecessarily.

Opening the door too often can cause the cold air to escape and the warm air to enter, which will make your refrigerator work harder to maintain the correct temperature. Only open the door when you need to and try to limit the amount of time that the door is open.

Additionally, try to keep your refrigerator as full as possible. A full fridge is more efficient than an empty one because there is less air that needs to be cooled. If you don’t have enough food to fill your fridge, consider placing bottles of water inside to help maintain the temperature.

Finally, make sure that the seals on your fridge door are tight and in good condition. Damaged or loose seals can allow cold air to escape and warm air to enter, making your fridge work harder than necessary. Inspect the seals regularly and replace them if they are damaged.


Refrigeration: Schedule regular maintenance.

The best way to keep your refrigerator running smoothly is to have it serviced by a professional regularly. During these appointments, the technician will clean the coils and door seals, as well as check for any other potential issues. They can also perform any necessary repairs or replacements. In between professional servicing, there are a few things you can do to keep your fridge running properly.

One of the most important things you can do is to keep the coils clean. The coils are located on the back of the fridge and help to transfer heat. If they become clogged with dirt and dust, they won’t be able to do their job properly, which can lead to your fridge not cooling correctly. To clean the coils, unplug the fridge and use a brush attachment on your vacuum cleaner to remove any dirt and debris.

By following these tips, you can help keep your refrigerator running smoothly and efficiently. If you have any concerns or notice any problems with your fridge, be sure to contact a qualified appliance repair technician right away.

32 Degrees provides HVAC services in Nevada. 32 Degrees is a leading provider of heating, ventilation, and air conditioning (HVAC) services. We have over decades of experience in the industry and are dedicated to providing our customers with the best possible service. We offer a wide range of HVAC services including installation, repair, and maintenance. We also offer a variety of financing options to make your HVAC purchase affordable. 32 Degrees is a BBB-accredited business with an A+ rating. Contact us today for all your HVAC needs!

One Response

Leave a Reply

Your email address will not be published.